
Erosion Control & Revegetation Products
We provide a comprehensive selection of erosion control and revegetation products, meticulously designed to address the diverse challenges of soil stabilization and environmental restoration. Our products are crafted from high-quality materials, ensuring exceptional performance in separation, filtration, and protection.
- Jute Matting
- Curlex I Excelsior
- Straw Blankets
- Erosion Control Netting
- Straw/Coconut
- 100% Coconut
- Recyclex TRM
- EZ Mulch AF
- Staples
- Profile Wood with Tack
- Profile Blend
- Environet Blankets
- Slicky Sticky
- Contact
- Flexterra
- 19-19-19
- 22-24-9
- 32-3-11
- 15-30-15
- Equalize GT
- Tuff Turf II Mixture – 5 lbs./1,000 sq. ft.
- 5-Way Ryegrass Mixture – 6 lbs./1,000 sq. ft.
- Champion Shady Mixture – 6 lbs./1,000 sq. ft.
- No Mow Mixture – 6 lbs./1,000 sq. ft.
- State of Ohio Class 1 “Lawn” Mixture – 5-10 lbs./1,000 sq. ft.
- State of Ohio Class 2 “Roadside” Mixture – 5 lbs./1,000 sq. ft.
- State of Ohio “3B Slope” Mixture – 6 lbs./1,000 sq. ft.
- Deluxe Pasture Mixture – 35-40 lbs. per acre
- Beauty Lawn Seed Mix – 5 lbs./1,000 sq. ft.
- Ohio Athletic Mix – 7-9 lbs./1,000 sq. ft.
- Earthway 2750 Bag Seeder and Spreader
VIEW ALL PRODUCTS
Jute Matting
Heavy Jute Matting is the natural effective way to stop erosion during the critical early
establishment of vegetation along waterways, median strips and embankments. Seeding can be applied before or after installation and plugging in plants can easily be done through the matting. Because Jute is a vegetable, this matting enriches soil as it decomposes, adding nutrients to the soil that feed the grass or plants after establishment. Jute slows water runoff by absorbing 5 times its weight in water and can be used on any type of terrain.
- Roll Width — 48″
- Roll Length— 225′
- Roll Weight —92 lbs.
- Meets ODOT spec 712.11 Type F
Curlex 1 Excelsior
Curlex I erosion control blanket consists of a specific cut of naturally seed free Great Lakes Aspen curled wood excelsior, with 80% of the fibers being six inches or greater in fiber length. This blanket is ideal for slopes and ditches with water runoff.
- Roll Width —4′ or 8′
- Roll Length – 112.5′
- Roll Weight—4′ — 36.5 lbs. 89′ — 73 lbs.
- Meets ODOT spec 712.11 Type G
Straw Blankets
AEC Premier Straw Erosion Control Blanket is a natural, stitched straw blanket that provides a temporary organic cover to reduce erosion, protect seeds, enhance germination, and hasten re-vegetation. The Single Net Blanket has a top degradable polypropylene netting with 2″ on center stitching. The Double Net Blanket has a top and bottom netting with 2″ on center stitching.
- Roll Width – 8′
- Roll Length— 112.5′
- Roll Weight— 50 lbs.
- Meets ODOT Spec 712.11 Type A (Single Net) Type B (Double Net)
Erosion Control Netting
This Netting is strong and durable yet lightweight and easy to handle. The netting has a square mesh opening of approximately 3/4″ x 3/4″ making it ideal after being stapled for holding straw in place in locations susceptible to wind and water erosion. This netting will gradually disintegrate by sunlight as the turf is established.
- Roll Widths – 3.5’ and 7’
- Roll Length – 3000’
- Roll Weight – 34 and 68 lbs.
- Meets ODOT Spec 712.11 Type 1
Straw/Coconut
AEC Premier Straw/Coconut blankets are stitched Straw/Coconut blended erosion control blankets that provide a temporary organic cover to reduce erosion, protect seeds, and enhance germination. The blend consists of 70% straw and 30% coconut fibers, blended evenly throughout the blanket. The top and bottom of each blanket is covered with a polypropylene netting.
- Roll Size — 8′
- Roll Length -112.5′
- Roll weight— 50 lbs.
- Meets ODOT spec 712.11 Type C
Recyclex TRM
Recyclex TRM is a three-dimensional Turf Reinforcement Mat specifically designed to provide permanent structural support for vegetation root systems and stem systems. Recyclex TRM can be installed with soil filled on top to allow the vegetation to grow into the blanket creating a permanent structural root system in matrix below, or installed over the soil which allows vegetation to grow up through its permanent matrix supporting the stem system.
- Roll Size – 8′
- Roll Length — 90′
- Roll Weight – 50 lbs.
- Meets ODOT spec 836 -Type 1
EZ Mulch AF
EZ Mulch AF is high performance pelletized mulch created to be applied by a spreader, by hand or through jet agitated machines. Each bag covers approximately 800 square feet when applied by hand or spreader. Coverage by Machine varies due to how many gallons and the type of machine being used. EZ Mulch holds 40% more water than other pellet mulches, making it the best flowing mulch available.
- Bag Size—40 lbs.
- Bags per pallet- 50
Profile Wood with Tack
Profile Wood with Tack is a fully biodegradable, Hydraulic Mulch composed of 100% recycled Thermally Refined virgin wood fibers and wetting agents including high-viscosity colloidal polysaccharides. Upon application, this product creates a porous, absorbent and flexible erosion resistant blanket with the soil that allows for rapid germination and accelerated plant growth.
- 100% Wood Fibers with Tack
- Bag Weight 50 lbs.
Profile Blend
Profile Blend is a biodegradable, Hydraulic Mulch composed of 100% recycled Thermally Refined virgin wood and cellulose fibers. Upon application, this product creates a porous, absorbent and flexible erosion resistant blanket with the soil that allows for rapid germination and accelerated plant growth.
- 70% Wood and 30% Cellulose Fiber
- Bag Weight 50 lbs.
Environet Blankets
Environet Blankets are created using a patented process of thermally refined wood and
degradable man-made fibers that are intertwined into a dimensional stable composite matrix that conforms to the soil surface. This technology enables Environet to minimize soil erosion while rapidly establishing vegetation.
- Roll Sizes – 40″ x 135′ and 82″ x 135′
- Roll Weights— 17 lbs. and 36 lbs.
- Rolls come in Green Dyed or Natural Color
Slicky Sticky
Slicky Sticky is a high-quality polyacrylamide, specially formulated as a hydro-seeding mulch additive. It is fully biodegradable, and environmentally safe. Slicky Sticky makes any mulch product, paper or wood, easier to pump. It is 6 to 8 times more slippery than guar, so clogging is highly unlikely in any machine, and greatly reduces clogs during the use of long hoses. Research has also shown Slicky Sticky has a profound effect on the performance of mulch. It allows coverage of 1 1/4 to 1 1/2 times the land area using the same amount of mulch. And when it is applied, mulch longevity is increased, further stabilizing the soil until planted seed becomes established.
- Case —30 lbs. with 2-15 lb. jugs
- Jug— 240 oz each
- Rate lubrication — 3+ oz per bag of mulch
- Rate Tackifier—1/4 to 3/4 of a pound per 1000 square feet of application
Contact
Contact Organic Tackifier is 100% guar-gum based for an efficient and effective method of dust and erosion control, and mulch/straw binding. It creates a fiber-to-seed-to-soil bond without hardening that reduces the need for reseeding while minimizing soil erosion. Contact also helps increase flow and pumping properties of mulch, allowing machinery to run more efficiently.
Application Rate
>2:1 Slope – 60 lbs. per Acre
3:1 to 2:1 Slope – 40 lbs. per Acre
4:1 to 3:1 Slope -30 lbs. per Acre
5:1 to modest Slope – 20 lbs. per Acre
- Packaging – 40 lb. case with 8—5 lb. bags
Flexterra
Flexterra uses patented technology combining both Chemical and Mechanical bonding techniques. Flexible Growth Medium (F.G.M.) shall be mixed at a rate of 50 lbs. Fiber/ 125 gallons of water. F.G.M. slurry shall be applied in successive layers, from two or more directions, to fully cover 100% of the soil surface. Superior Chemistry means
no cure time, which enables the matrix to handle higher rates of surface flow energy from heavy rains- upon application.
- Minimum rate of 3,000 lbs./acre, 3:1 slopes.
- Minimum rate of 3,300 lbs. – 3,500 lbs./acre for 2″ 1 slopes.
- Minimum rate of 4,000 lbs/acre for rough textured, steep 1:1 slopes
F.G.M. has been used on projects ranging from rough ground and steep, rocky slopes to moderate — or steep-graded fill slopes. It is also used in wetland and other wildlife areas not compatible with netting. It has proven itself in broad mix of applications: Mine Reclamation, DOT & Highway Projects, Commercial and Residential Construction and
Golf Course Construction.
Equalize GT
Pelletized Hi-Mag Limestone quickly neutralizes acidic soil for optimal growing conditions and increases nutrient availability.
- Calcium (Ca) ……………………………………20.00%
- Magnesium (Mg) ……………………………….12.00%
- Calcium Carbonate (CaCO3) ………………50.00%
- Calcium Carbonate Equivalent (CCE) …..97.00%
- Calcium Oxide (CaO) ………………..……….28.00%
- Magnesium Carbonate (MgCO3) ………….41.76%
- Magnesium Oxide (MgO) …………………….19.92%
- Moisture Content does not exceed …………1.00%
Tuff Turf II Mixture – 5 lbs./1,000 sq. ft.
Our “Tuff Turf” mix is designed for rapid establishment in full sun areas. These special, wear tolerant ryegrasses, hold up well to traffic. Tuff Turf II will do the job for the homeowner who has children and/or pets.
- 40% Kentucky Bluegrass
- 20% Patriot 4 or Evening Shade Perennial Ryegrass
- 20% Apple 3GL Perennial Ryegrass
- 20% Vision Perennial Ryegrass
5-Way Ryegrass Mixture – 6 lbs./1,000 sq. ft.
Why settle for a mixture of “no name” varieties. Our 5-Way Ryegrass mix is continually
upgraded to contain some of the newest and highest rated ryegrasses on the market. This is what makes it a repeat favorite of golf superintendents and lawn renovation specialists.
- 20% Slugger 3GL or Fastball 3GL Perennial Ryegrass
- 20% Pangea GLR Perennial Ryegrass
- 20% Apple 3GL Perennial Ryegrass
- 20% Stellar 4GL or Homerun LS Perennial Ryegrass
- 20% Principal II Perennial Ryegrass
Champion Shady Mixture – 6 lbs./1,000 sq. ft.
The diversity of improved fine fescues in “Champion Shady” will easily outperform those shade mixes that consist primarily of the poorer performing “common” red fescue. Shade grasses are slower to develop; we recommend keeping the lawn well-watered during establishment period and avoid over fertilization.
- 30% Edgewood or Cardinal II Creeping Red Fescue
- 20% Zodiac Chewings Fescue
- 15% Heathland Chewings Fescue
- 15% Stellar 4GL Perennial Ryegrass
- 10% Beacon Hard Fescue
- 10% Action Kentucky Bluegrass
No Mow Mixture – 6 lbs./1,000 sq. ft.
The fine bladed “No Mow” mix will not look like your traditional lawn. Un-mowed height will top out at 8-10″. No Mow can be mowed occasionally (to suit the property owner’s taste). Competitors mix contains chewings or creeping red fescues. However, they simply do not do the job as well as our mix!
- 40% Nanook Hard Fescue
- 30% Sword II Hard Fescue
- 30% Blue Mesa Sheep Fescue
Deluxe Pasture Mixture – 35-40 lbs. per acre
“Deluxe Pasture” mixture is a non-endophyte forage mixture. This nutritional mix can be used for pasture or cut for hay.
- 25% Potomac Orchard grass
- 20% Timothy
- 15% Tetraploid Perennial Ryegrass
- 10% Ginger Kentucky Bluegrass
- 10% Tetraploid Annual Ryegrass
- 10% Pennlate Orchard grass
- 4% Alfalfa
- 4% Medium Red Clover
- 2% Ladino Clover
Beauty Lawn Seed Mix – 5 lbs. per 1000 sq. ft.
Our Beauty Lawn Mix has been specially designed for establishing a lawn in partial to full sun areas and does well in some sandy soils. This mix is only found at Firelands Supply Co.
- 40% Kentucky Blue
- 30% Edgewood Creeping Red Fescue
- 15% Slugger 3GL Perennial Ryegrass
- 15% Principal II Perennial Ryegrass
Ohio Athletic Mix – 7 – 9 lbs. per 1000 sq. ft.
Great lawn seed for homes with kids and dogs. This deep-rooted mix is durable and can
withstand situations bluegrass can’t. Recommended to be mowed at around 3” for best results.
- 40% GTO Tall Fescue
- 40% Inferno Tall Fescue
- 10% Action Kentucky Bluegrass
- 10% Revenge GLX Perennial Ryegrass
Earthway 2750 Bag Seeder and Spreader
The nylon bag is tear, corrosion, and weather resistant. This professional grade spreader holds up to 25 lbs. of material and makes it easy to get into areas machinery can’t get in to.
- Sloped floor and rocking agitator
- Strap attached to bag
- Spring loaded settings
- 25 pound capacity

Geotextiles & Landscape Fabrics
We offer a comprehensive range of geotextiles and landscape fabrics designed to meet the diverse needs of soil stabilization, filtration, and erosion control across various applications. Our nonwoven and woven geotextiles are crafted from high-quality polypropylene, ensuring durability and resistance to biological degradation, UV deterioration, and common soil chemicals.
- Nonwovens
- Wovens
- Terragrid RX1200
- Tensar BX11
- Woven Landscape Fabric
- Ground Cover
- Nonwoven Filter Fabric
- Permaloc Clean Line Edging
VIEW ALL PRODUCTS
Nonwovens
Nonwovens are used in a wide variety of applications including separation, filtration, and protection applications. The needle punched nonwoven geotextiles are composed of
polypropylene fibers that are inert to biological degradation and resists naturally encountered chemicals, alkalis, and acids.
- 135N – Roll size – 12 ½’ x 360’, Meets ODOT Spec – Type A for filter fabrics
- 140N – Roll size – 12 ½’ x 360’
- 160N – Roll size – 15’ x 300’
- 180N – Roll size – 15’ x 300’, Meets ODOT Spec – Type B for filter fabrics
Wovens
Woven geotextiles are manufactured using high tenacity polypropylene yarn that are woven to form a dimensionally stable network, which allows the yarns to maintain their relative position. This material resists ultraviolet deterioration, rotting and biological degradation and is inert to commonly encountered soil chemicals.
200W meets or exceeds ODOT Spec – Type D for filter fabrics
- 200W – Roll sizes:
- 12 ½’ x 432’
- 15’ x 360’
- 17 ½’ x 309’
315W is used in areas where there is heavy truck traffic or softer sub grade
- 315W – Roll size – 12 ½’ x 360’
TerraGrid RX1200
Meets U.S. industry standards for Type 2 biaxial geogrids. Produced in an ISO 9001
certified facility, TerraGrid RX1200 is manufactured from quality virgin polypropylene resin with no inclusion of post-consumer recycled resin. The extruded sheet, with sequential punching and stretching manufacturing processes, produces the integrally formed network of apertures and ribs/nodes of TerraGrid RX1200, an aggregate confinement geogrid used for application within trafficked structures.
- Roll Size – 12 ½’ x 246’
- Roll Weight – 194 lbs.
- Meets ODOT Spec 861 Type 2
Tensar BX11
Tensar BX11 is a punched drawn polypropylene geogrid product that is integrally formed into a biaxial geogrid. Tensar BX11 resists ultraviolet deterioration, rooting, and biological degradation and is inert to commonly encountered soil chemicals.
- Roll Size – 12.9’ x 246’
- Roll Weight – 148 lbs.
Woven Landscape Fabric
Woven Landscape Fabric is a black needle punched heavy polypropylene fabric with a
stripe every 12 inches. The needle punched fabric allows water and air to pass through to the plant roots, creating a healthy growth environment. Plastic film and laminated materials do not allow water and air to pass through freely, creating poor soil conditions.
- Roll Sizes : 3’, 4’, 5’, 6’, 8’ and 12’ Widths x 250’ Long
- Fabric Weight – 5 oz
Permaloc Clean Line Edging
Permaloc Clean Line Edging is made with an interlocking snap-down splicing system with interlocking single sided stakes for a rapid permanent installation. Made of Aluminum, this eliminates rust, cracking or rotting.
- Size – 1/8” x 4” x 8’ Sections
- Box Quantity – 15 with 3 Aluminum stakes per section 12” long
- Color – Black DuraFlex, Electrostatically applied baked on paint.

ODOT Highway Materials
We provide an extensive selection of advanced highway safety systems designed to enhance the safety and performance of transportation infrastructure. Our products are engineered to effectively absorb impact energy and redirect vehicles during collisions, minimizing the risk of injury and damage.
- RIB-BAK U-Channel Sign Post
- Square Tube
- Cable Rail
- Guardrail
- MFLEAT MASH Flared Energy Absorbing Terminal
- MSKT MASH Sequential Kinking Terminal
- FLEAT-MT
- SoftStop System
- MATT TM Median Attenuating Trend Terminal
- CAT 350
- SRT-350
- Midwest Guardrail System
- Thrie-Beam Highway Guardrail
- Used Guardrail
- Used Steel Post
- Used Wood Post
- Spill Containment Products
VIEW ALL PRODUCTS
RIB-BAK U-Channel Sign Post
Nucor Steel Marion RIB-BAK U-Channel Sign Post are made of tough new billet steel, RIB-BAK is the strongest U-Channel post available, especially in crucial load bearing points, with over 25% greater tensile strength than our competitor’s rail steel. The RIB-Bak Design withstands higher wind loads and saves money by supporting a lot more sign per post. Its contact points are flush surfaces, providing solid, more permanent sign attachment.
- Available in Galvanized or Green Powder Coating
- We stock 2 lb., 3 lb. RIB-BAK and 1.12 lb. Delineator Post
- Galvanized RIB-BAK Post are ODOT approved
- Exceeds ASTM Requirements
Square Tube
Our square tube posts are strong, versatile, and cost effective. These posts are punched throughout the post on 1” centers, which provides four flat surfaces for mounting signs in any direction and at any height without the need for additional hardware or tools. This sign support system is approved by the Federal Highway Administration. The posts are hot-dip galvanized, conforming to ASTM A635, with a chemical treatment for enhanced corrosion protection.
- Compatible with all existing square posts
- Mating tube sections allow for fast, safe, ground-level installations
- Ground anchor posts allow for rapid replacement installations when necessary
- Square tube sections provide superior resistance to wind and other forces over
- U-Channel or round posts.
Cable Rail
NU-CABLE Barrier systems offer a unique combination of 3-cable (TL-3) and 4-cable (TL-4) crash-test proven protection, while costing 50 to 75% less than traditional W-beam and concrete barriers. Both systems can be used in either median or roadside configurations.
- 4 lb. galvanized U-channel line post are strong yet economical
- Cables and post attach with a unique locking hook bolts that absorb energy
during crashes - Anchored at both ends into FHWA approved cable release post
- Easy to maintain and repair. Cables are stretched and tightened on site
Guardrail
We stock a complete line of guardrail, post and hardware. All our materials are ODOT approved and meet the specs of todays standards.
Convex and Concave Curved Guardrail Panels
Guardrail sections to be installed on curves with a radius of 5. to 70. Terms convex or concave refer to the inward or outward curve relative to the traffic face of the guardrail.
FLEAT-MT
The FLEAT-MT™ is a median terminal used in wide medians. The FLEAT-MT combines the trusted components of the original FLEAT, with additional components to create the FLEAT-MT.
How the FLEAT-MT™ Functions
The front single-sided section of the FLEAT-MT™ is similar to the roadside FLEAT™ and functions the in a similar manner. Depending on the severity of the impact, the vehicle may be stopped before reaching the second impact head at post number 4. If the end-on impact is severe enough, the vehicle will activate the second impact head. This impact head will then begin to slide down the guardrail sequentially kinking the backside rail.
FLEAT-MT Features
- Attaches directly to median double-sided W-Beam rail.
- Fast and easy installation and repair.
- 37′ 6″ long for Test Level 3 design speed.
- Can be used with wood or steel breakaway posts.
SOFTSTOP ® SYSTEM
The SoftStop ® System is a tangent, single-sided, energy absorbing, re-directive and gating end terminal. The SoftStop ® System is tested to MASH 2016 Test Level 3 criteria and may be used in Test Level 1, Test Level 2, and Test Level 3 applications. During head-on impacts within MASH criteria, the SoftStop ® System is designed to dissipate energy by the head traveling down the anchored W-Beam panels. During length-of-need side impacts within MASH criteria, the SoftStop ® System is designed to contain and redirect the impacting vehicle.
MATT TM MEDIAN ATTENUATING TREND ® TERMINAL
MATT is a tangent, double-sided, re-directive/gating and energy-absorbing attenuator/end terminal, for use with various longitudinal highway barriers in either unidirectional or bidirectional traffic applications – to include roadside, shoulder, median, and gore installations. MATT is tested to MASH-2nd Edition (with 2020 Errata) Test Level 3 criteria and may be used in Test Level 1, Test Level 2, and Test Level 3 applications – when installed at the full Test Level 3 system length of 34′ 4-1/2″ [10.48 m].
Midwest Guardrail System
W-Beam Barrier for the Future
The Midwest Guardrail System (or MGS Guardrail) was engineered to handle today’s modern vehicles. Existing W-Beam barriers were developed many years ago when the vehicle fleet was different than it is today. These existing W-Beam barriers measure 27 5/8″ to the top of the rail. When crash tested with today’s higher center of gravity vehicles, many results have not been successful.
In 2001-2002, the Midwest States Pooled Fund Program, funded by 11 states, recognized the need for a new generic strong post W-Beam barrier that would be compatible with the newer higher center of gravity vehicles crash tested under NCHRP 305 Test Level 3 conditions. The result was the MGS Guardrail barrier.
The differences between the MGS Guardrail Barrier and the older W-Beam barrier are:
- The MGS top of the rail height is 31″ rather than 27 5/8″
- The MGS blockout is 12″ rather than 8″
- The MGS W-Beam guardrail splices occur mid-span between posts rather than at the post
Thrie-Beam Highway Guardrail
Thrie-Beam guardrail is produced in standard AASHTO 12′-6″ or 25′-0″ lengths. Custom lengths and custom post-hole spacing are available on request. Our Thrie-Beam highway guardrail is offered in 10-gauge or 12-gauge steel, four types of finishes, and in pre-curved shapes as part of our commitment to value.
Used Guardrail
We have guardrail that has been previously used on roadways and highways. This rail can be used to replace damaged rail or for retaining walls, warehouse safety barriers and farm fences for cattle. Each Panel is 13’6 overall length but figured at 12’6 working length when putting together multiple sections.

Sediment Control Products
We offer an advanced selection of sediment control solutions, designed to efficiently manage and filter silt from water runoff in construction and disturbed soil areas. Our high-performance sediment control systems are engineered to prevent sediment from migrating to adjacent roads, drainage ditches, and streams during heavy rains.
- Silt Fence
- Dandy Bags
- Inlet Filter
- Filter Sock
- Straw Wattles
VIEW ALL PRODUCTS
Silt Fence
Our premium fabric, pre-assembled fences are for the filtration of silt from water runoff in disturbed soil areas. These fences control sediments surrounding construction sites, preventing heavy rains from carrying the silt onto adjacent roads, into drainage ditches and streams.
- Roll Sizes -3’ x 100’ (ODOT Spec 712.09 Type C for Sediment Fences)
- 2’ x 100’
- 3’ x 1500’ bulk roll no stakes
- Stakes – 8’ spacing
- Fabric – 100 gram
Dandy Bags
Dandy Bags are designed for use with flat grates, including round and mountable curbs to filter sediment-laden storm water. The suspended solids are allowed to settle out the slowed flow and are captured by the Dandy Bag prior to entering the inlet.
- Size – 28″ x 28″
- Color – Orange
Dandy Curb Bag and gutter inlet protection allows suspended solids to settle out of the slowed storm water flow and are captured prior to entering the inlet.
- Size – 36″ x 18″
- Color – Orange
Filter Sock
Filter Socks are designed to allow water runoff to pass through the fibrous sock material, leaving solids behind. Compost filter socks are typically less expensive over the life of a project, faster to install and dispose of than silt fence. The socks can also handle a higher flow rate than silt fence. Another advantage is they can be installed in areas where silt fence cannot, such as paved surfaces, frozen ground and around trees.
- Sizes — 8″ x 200′ with 19 Stakes
- 12″ x 110′ with 12 Stakes
- Average Weight- 1600 lbs.
- Material — Biodegradable Compost
Straw Wattles
Straw Wattles are used as sediment filter barriers on slopes, and it reduces surface sheet erosion as it captures the sediment. Made of Agricultural, noxious weed free straw, these Wattles are easier to install than Silt Fence on slopes.
- Wattle size — 9″ x 25′
- Pallet— 10 per skid
- Stakes— 1 1/8″ x 1 1/8″ x 30″ (sold separately) 6 to 10 stakes per Wattle needed.

Gas Pipeline Supplies
We provide a complete selection of gas and pipeline supplies tailored to meet the diverse requirements of the energy and utilities sectors. Our range includes high-quality pipes, fittings, valves, and other essential components, all designed for optimal performance in transporting gas and liquids.
Sold exclusively in our Cambridge Warehouse. Call (740) 432-0200 to learn more.
- SDR 35
- SCH 40 PVC
- Triple Wall Pipe
- Dual Wall/Fittings
- Single Wall Pipe
- Supersiltfence
- Wireback Siltfence
- Siltsaver P-1 Siltfence
- American Wick Drain
- Catch Basins
- Survey Stakes
VIEW ALL PRODUCTS
AMERICAN WICK DRAIN
American Wick drain
Use on structure foundations
Slopes , Fields , back yard
Lay it flat or Trench in with Trencher
To minimize Disturbances.
American Wick Drain saves your project money and time by eliminating stone backfill. Covered in Filter Fabric no gravel needed. Use on any civil projects; Golf Courses, Retaining Walls.
Sold exclusively in our Cambridge Warehouse. Call (740) 432-0200 to learn more.

Safety Supplies
Our safety solutions are designed to provide maximum visibility and reliability in various environments. Our high-visibility fencing is crafted to ensure easy installation and durability, even under severe weather conditions, making it ideal for construction sites and crowd control at events. Complementing this, our advanced personal safety devices offer superior visibility, utilizing cutting-edge LED technology to ensure they can be seen from several miles away.
- Safety Fence
- Gaudian Angel Elite Series
- Guardian Angel Micro Series
VIEW ALL PRODUCTS
Safety Fence
This fence has been engineered for high visibility and low wind drag. This allows post to be placed further apart, saving installation time and money. With the vertical and horizontal strands, this fence is easy to install and will withstand most severe weather conditions. Ideal for high visibility construction warning barricade and crowd control at sporting events.
- Roll Size – 4’ x 100’ square mesh
- Weight – 18 lb.
- Color – Orange
Guardian Angel Elite Series®
Guardian Angel Elite Series™ was designed for professionals that
need visibility and versatility while on the job. Developed with the latest in LED
technology that allows all our GA Elite Series™ personal safety devices to be seen for
5+ miles. Our latest Elite device includes many new enhancements driven by customer
feedback.
Guardian Angel Micro Series®
We’ve completely reimagined the Micro Series™ wearable safety light, making it 25%
brighter and increasing average run time by 25%. Additionally, like our Elite Series™,
the new Micro is now IP68 rated, meaning it’s waterproof and dust proof. With lighting
on all sides that’s visible up to 3+ miles, this is the one light with 1,000s of uses – no
matter where your adventures take you.